l***z 发帖数: 19 | 1 本人学校专业排名很靠后,快两年了,方向是通过微纳米级压痕测试来分析smart
materila/thin films的力学、磁学等性能,目前还只涉及理论分析和数值计算。我不
知道这样继续下去,前景出路怎样? 谢谢 |
h****l 发帖数: 7290 | 2 应该是灰常的不乐观
【在 l***z 的大作中提到】 : 本人学校专业排名很靠后,快两年了,方向是通过微纳米级压痕测试来分析smart : materila/thin films的力学、磁学等性能,目前还只涉及理论分析和数值计算。我不 : 知道这样继续下去,前景出路怎样? 谢谢
|
r********o 发帖数: 1423 | 3 learn FEM, FEM is now 10K Gold Oil
【在 l***z 的大作中提到】 : 本人学校专业排名很靠后,快两年了,方向是通过微纳米级压痕测试来分析smart : materila/thin films的力学、磁学等性能,目前还只涉及理论分析和数值计算。我不 : 知道这样继续下去,前景出路怎样? 谢谢
|
m****l 发帖数: 22 | |
s***h 发帖数: 592 | 5 FEA is not applicable for his field
length scale greatly affects the results
by now almost no commercial software can achieve the goal at nanoscale
【在 m****l 的大作中提到】 : oh, I see.
|
m****l 发帖数: 22 | 6 oh, I see.
【在 s***h 的大作中提到】 : FEA is not applicable for his field : length scale greatly affects the results : by now almost no commercial software can achieve the goal at nanoscale
|
l***z 发帖数: 19 | 7 你是说比如用Abaqus做FEA,以后会很好找工作?
【在 r********o 的大作中提到】 : learn FEM, FEM is now 10K Gold Oil
|
b*****f 发帖数: 341 | 8 建模才有用,会用还不够
【在 l***z 的大作中提到】 : 你是说比如用Abaqus做FEA,以后会很好找工作?
|
s***h 发帖数: 592 | 9 I think analysis is more important than modelling.
of course modelling is very important,
but senior engineer seldom do modelling by themselves.
【在 b*****f 的大作中提到】 : 建模才有用,会用还不够
|
r********o 发帖数: 1423 | 10 not for his field, for jobhunting
【在 s***h 的大作中提到】 : FEA is not applicable for his field : length scale greatly affects the results : by now almost no commercial software can achieve the goal at nanoscale
|
g*****k 发帖数: 1669 | 11 Where can I find FEM job? Are there many? Thanks.
【在 r********o 的大作中提到】 : learn FEM, FEM is now 10K Gold Oil
|
l**o 发帖数: 1240 | 12 Not many for chinese
【在 g*****k 的大作中提到】 : Where can I find FEM job? Are there many? Thanks.
|