由买买提看人间百态

topics

全部话题 - 话题: ebl
1 (共1页)
c****u
发帖数: 3277
1
来自主题: Bridge版 - EBL Champions cup
BBO will broadcast EBL's champions cup this weekend.
I'll comment on the 3rd segment of the final,
which starts from 9:am EDT this Sunday.
e******g
发帖数: 461
2
EBL的lift-off用remover PG啊,aceton弱了点
你看看microchem的datasheet就知道了
t***s
发帖数: 163
3
光学LITHOGRAPHY的最小分辨率是 光的波长/(2* 介质的折射率).
用小波长的光源是提高分辨率的关键.跟光刻胶关系不太大吧.
EBL的分辨率是很小. 因为电子波的德波若衣波长短. EBL非常费时. PHOTOLITHOGRAPHY
工业界用的多, EBL研究机构用的多.
s***y
发帖数: 7034
4
来自主题: NextGeneration版 - 大家孩子有用父母复合姓的么?
还是一家跑出3个姓来啊。。我有个美国同学姓Eble-Hankins,就是她本来姓Eble,她
老公姓Hankins,结婚时两个人都改名字,这样全家都还是一个姓,呵呵。
R****a
发帖数: 6858
5

国内的LED和光伏经营困难就是因为这个核心装备一直实现不了国产化,全都得依靠昂
贵的进口货,所以产品成本高,跟国外产品相比竞争力不明显,国外一征收高额关税就
雪上加霜。
现在成本大幅度降低了以后,即使付完高额关税,利润也很可观了。
以后要是器件制造的设备譬如SEM, TEM, EBL, Photo-lithography, 也都国产化了,国
内LED, Solar的成本还能再降低一倍以上。国外的白猪就等着喝西北风吧。
t****3
发帖数: 2337
6
来自主题: Automobile版 - 貌似SH-AWD还挺牛啊
Q7只有一个中央限滑的托森差速器,前后轴的差速器都是开放的,不带限滑装置,这种
结构看起来的确不够强悍。Torsen托森差速器与普通的开放式差速器不同,Torsen托森
差速器会自动将扭矩分配给阻力较大一侧的车轮,而普通的开放式差速器,则正与
Torsen托森差速器相反,会将扭矩分配给阻力较小的一侧。
托森的反应速度快最大好处就是连续的动力输出,并不会中间因为限滑差速器工作而导
致车辆的动力输出不连续,直接好处就是降低了陷车的概率。
Q7的EBL系统可几乎100%将打滑的轮子通过单轮制动刹死,这点是至关重要的一点,因
为如果制动力打折扣,动力将不能传输到有附着力那侧轮胎,那样的话就算你托森再强
大,Q7也是个越野废物了。
事实上Torsen托森差速器不是奥迪的专有,很多车型都使用了托森差速器,最早使用的
是悍马,并且前后轴都有。奥迪广泛使用托森差速器,并且以Quattro的名字宣传。
但是奥迪的Q不是一个托森差速器那么简单,他有自己的专利与技术。由于位置关系,
中央限滑的托森差速器又有体积的限制,所以成本更高。只有至少使用了中央差速器的
才能算做AWD。
下面是使用了托森差速器车型列表... 阅读全帖
z*****i
发帖数: 43
7
来自主题: Classified版 - 求semiconductor方面的工作推荐
PhD candidate,马上毕业(12月),现在还没找到工作,如果有也是这方面的前辈,请帮
助推荐一下吧,谢谢,以下是我的skills:
Skills and Techniques:
♦ Semiconductor device fabrication process: Developed new methods for
quantum dot device fabrication and characterization; Conducted and
Optimized the fabrication process.
♦ Fabrication and Characterization techniques: 5 years hands-on
experience with: Photolithography, Electron Beam Lithography (EBL), Reactive
Ion Etching (RIE), Thin film Deposition, Wire Bonding, Semiconductor Device
Pack... 阅读全帖
z*****i
发帖数: 43
8
来自主题: Classified版 - 求semiconductor方面的工作推荐
PhD candidate,马上毕业(12月),现在还没找到工作,如果有也是这方面的前辈,请帮
助推荐一下吧,
谢谢,以下是我的skills:
Skills and Techniques:
♦ Semiconductor device fabrication process: Developed new methods for
quantum dot device fabrication and characterization; Conducted and
Optimized the fabrication process.
♦ Fabrication and Characterization techniques: 5 years hands-on
experience with: Photolithography, Electron Beam Lithography (EBL), Reactive
Ion Etching (RIE), Thin film Deposition, Wire Bonding, Semiconductor Device
Pac... 阅读全帖
z*****i
发帖数: 43
9
来自主题: Classified版 - 求semiconductor方面的工作推荐
PhD candidate,马上毕业(12月),现在还没找到工作,如果有也是这方面的前辈,请帮
助推荐一下吧,谢谢,以下是我的skills:
Skills and Techniques:
♦ Semiconductor device fabrication process: Developed new methods for
quantum dot device fabrication and characterization; Conducted and
Optimized the fabrication process.
♦ Fabrication and Characterization techniques: 5 years hands-on
experience with: Photolithography, Electron Beam Lithography (EBL), Reactive
Ion Etching (RIE), Thin film Deposition, Wire Bonding, Semiconductor Device
Pack... 阅读全帖
z*****i
发帖数: 43
10
来自主题: Classified版 - 求semiconductor方面的工作推荐
PhD candidate,马上毕业(12月),现在还没找到工作,如果有也是这方面的前辈,请帮
助推荐一下吧,谢谢,以下是我的skills:
Skills and Techniques:
♦ Semiconductor device fabrication process: Developed new methods for
quantum dot device fabrication and characterization; Conducted and
Optimized the fabrication process.
♦ Fabrication and Characterization techniques: 5 years hands-on
experience with: Photolithography, Electron Beam Lithography (EBL), Reactive
Ion Etching (RIE), Thin film Deposition, Wire Bonding, Semiconductor Device
Pack... 阅读全帖
s***e
发帖数: 7166
11
来自主题: Faculty版 - 请教培训人员午饭问题
生物的那些WOODOO我不懂,SEM做小并不是很困难的事情,无非是牺牲性能而已。
比如分辨率降低,噪声加大,样品台不能旋转,喷水,喷烟……反正其针对的用户
对SEM的要求本来就非常低,看个微米级了不起了,搞生物的又不需要100keV,
不需要EBL或者FIB……
p*******y
发帖数: 50
12
来自主题: JobHunting版 - 帮朋友报个offer
波士顿地区,fresh phd,CS,95K base+5K (EBL?)。这个怎样?
顺便问下,波士顿地区100K相当于湾区多少K?
p*******y
发帖数: 50
13
来自主题: JobHunting版 - 帮朋友报个offer
波士顿地区,fresh phd,CS,95K base+5K (EBL?)。这个怎样?
顺便问下,波士顿地区100K相当于湾区多少K?
z*****i
发帖数: 43
14
来自主题: JobHunting版 - 求semiconductor方面的工作推荐
PhD candidate,马上八月份毕业,现在还没找到工作,如果有也是这方面的前辈,请帮
助推荐一下吧,
谢谢,以下是我的skills:
Skills and Techniques:
♦ Semiconductor device fabrication process: Developed new methods for
quantum dot device fabrication and characterization; Conducted and
Optimized the fabrication process.
♦ Fabrication and Characterization techniques: 5 years hands-on
experience with: Photolithography, Electron Beam Lithography (EBL), Reactive
Ion Etching (RIE), Thin film Deposition, Wire Bonding, Semiconductor Device
Pack... 阅读全帖
m*********o
发帖数: 4
15
There are three post-doctor positions:
1. nanoprint for high resolution nanoscale color display (prefer canditates
with experience in Fano, FP, or relevant nanostructure resonance; and EBL,
FIB, EELS are pluses);
2. Diffraction optics with experience in DOE, holograms;
3. High efficiency metasurface, including experience in plasmonic/dielectric
metasurface.
Prof. Cheng-Wei Qiu
Department of Electrical & Computer Engineering
National University of Singapore
4 Engineering Drive 3, Singapore 117583... 阅读全帖
f**********r
发帖数: 6
16
来自主题: Immigration版 - eurekalert 和 R&D Mag---ebl application
最近的一篇文章被eurekalert 和 R&D Mag报道,算不算媒体报道?这两个杂志怎么样
?报道的时候
把同一期的文章都介绍了。
K**o
发帖数: 906
17
来自主题: Immigration版 - EB1A和NIW都批了
这500多份应该有很多eb2的,应该批的比ebl快
t*****g
发帖数: 54
18
来自主题: Immigration版 - 140批后,485需要等多久?
多谢,多谢!再请问,eb1b类的485和EB2类的485花的时间一样吗?俺是EBl类,俺的
140不到一个月就批了。那485是不是会花更多时间。
s****r
发帖数: 1446
19
请问你当时的EBL是怎么弄的?
s****r
发帖数: 1446
20
如果EBL写上年底合同到期不知能不能用?
b**********r
发帖数: 1580
21
Same PD, hand hand.
Looking forward to Eb3 浜屾帓
銆鍦Dividedbysu () 鐨勫ぇ浣滀腑鎻愬埌: 銆br />
ф鎳備簡銆銆傝阿杩囥鎴戣寰楀鏋滆繖娆B涓帓瓒呰繃浜屾帓14骞鏈
堬紝鎸夐亾鐞嗕簩鎺掑簲璇ヨ鐩稿簲寰悗璧版墠瀵广 鎴戞槸鍘熻EBL
z*****i
发帖数: 43
22
来自主题: NewJersey版 - 求semiconductor方面的工作推荐
马上八月份毕业,现在还没找到工作,如果有也是这方面的前辈,请帮助推荐一下吧,
谢谢,以下是我的skills:
Skills and Techniques:
♦ Semiconductor device fabrication process: Developed new methods for
quantum dot device fabrication and characterization; Conducted and
Optimized the fabrication process.
♦ Fabrication and Characterization techniques: 5 years hands-on
experience with: Photolithography, Electron Beam Lithography (EBL), Reactive
Ion Etching (RIE), Thin film Deposition, Wire Bonding, Semiconductor Device
Packaging, Atomic f... 阅读全帖
z*****i
发帖数: 43
23
来自主题: SanFrancisco版 - 求semiconductor方面的工作推荐
PhD candidate,马上毕业(12月),现在还没找到工作,如果有也是这方面的前辈,请帮
助推荐一下吧,谢谢,以下是我的skills:
Skills and Techniques:
♦ Semiconductor device fabrication process: Developed new methods for
quantum dot device fabrication and characterization; Conducted and
Optimized the fabrication process.
♦ Fabrication and Characterization techniques: 5 years hands-on
experience with: Photolithography, Electron Beam Lithography (EBL), Reactive
Ion Etching (RIE), Thin film Deposition, Wire Bonding, Semiconductor Device
Pack... 阅读全帖
z*****i
发帖数: 43
24
来自主题: Texas版 - 求semiconductor方面的工作推荐
PhD candidate,马上毕业(12月),现在还没找到工作,如果有也是这方面的前辈,请帮
助推荐一下吧,谢谢,以下是我的skills:
Skills and Techniques:
♦ Semiconductor device fabrication process: Developed new methods for
quantum dot device fabrication and characterization; Conducted and
Optimized the fabrication process.
♦ Fabrication and Characterization techniques: 5 years hands-on
experience with: Photolithography, Electron Beam Lithography (EBL), Reactive
Ion Etching (RIE), Thin film Deposition, Wire Bonding, Semiconductor Device
Pack... 阅读全帖
f*****x
发帖数: 545
25
来自主题: Bridge版 - EBL Champions cup
is it possible that there will finally develop a sort of league like european
football champion league? or even a world league【 在 cozofu (但为君故) 的大作
中提到: 】
b***y
发帖数: 2804
26
最近在youtube上发现的几个link,有图有真相~~
F/N:https://www.youtube.com/watch?v=TKe7gLTfaF8
F/S:https://www.youtube.com/watch?v=831tJ4EHLBY
德国医生:https://www.youtube.com/watch?v=1xVj1EQ_vSI
顺便提一下调查作弊事件的最新进展:F/S已被EBL禁赛各5年,并且终生禁止他们搭档

发帖数: 1
27
来自主题: AnthroLing版 - WHY IDO?
WHY IDO?
http://idolinguo.org.uk/whyido.htm
NOTE: Because of the difficulty of showing Esperanto's special accented
letters, where a letter which in Esperanto should carry a circumflex it is
shown here followed by a circumflex (^), and where the letter 'u' should
carry a breve it is followed by a tilde (~).
The idea of using a constructed language as a medium of international
communication - not replacing existing languages but supplementing them - is
far from new. The first such language to ach... 阅读全帖
p******s
发帖数: 62
28
为何我的sample很多地方PMMA很难用acetone洗掉。
恳请指点一下
3x
p******s
发帖数: 62
29
3X very much
PK
发帖数: 1153
30
来自主题: EE版 - e beam lithography有前途么
这个我有点笔误了 不好意思
电子产业里面贴近消费电子产品的应该收益还是很大的 像嵌入式系统啊 还是不错的
我主要说的是类似EBL FIB这类的制造层次的
说电子产业主要被你那句半导体要是夕阳了 电子工业一半就垮了引得 呵呵
PK
发帖数: 1153
31
来自主题: EE版 - e beam lithography有前途么
e-beam 现在主要还是做mask吧?
我主要考虑的是现在市场对新工艺的技术突破是不是有很大需求
最近有个做EBL的工作的phone interview所以才有此一问
不知道前途如何
o**o
发帖数: 10
32
all of the recipes I found online react with PMMA much faster than Cu and Ag.
Who knows how to make patterns on Cu film? I choose EBL. Is there any
other better method? The line with is about 100 nm to 1000 nm. Can you
contact with me via mitbbs email? Thanks so much!
e****o
发帖数: 165
33
来自主题: Mathematics版 - thesis help
有qq么?加我qq,以后需要paper,尤其是ebrary和ebl等的ebook
直接告诉我。
嘻嘻
e******8
发帖数: 319
34
来自主题: MedicalCareer版 - 记录自己的USMLE复习过程
I just got a pull over before 10 min on the way to Ebling Library. Sign!
There's four way stop sign when I across the Shorewood. I try to full stop
my car five meters before the stop sign, then rolling slowing to across the
road, because I need to check the right side, there're many trees block my
sight.
What a coincidence there a motor coming, it starts to flashing and follow my
car, I had to pull over and waithing his check. Then the man got off his
motor, try to put something on his uniform. ... 阅读全帖
g*******k
发帖数: 172
35
来自主题: NanoST版 - 用EBL给碳管做金属接触的吗?
有人做过吗? 你们是怎么定位碳管的阿?
o**o
发帖数: 10
36
all of the recipes I found online react with PMMA much faster than Cu and Ag.
Who knows how to make patterns on Cu film? I choose EBL. Is there any
other better method? The line width is about 100 nm to 1000 nm.
Can you contact with me via mitbbs email? Thanks so much!
s******x
发帖数: 15232
dn
发帖数: 43
38
45nm with DUV 193nm source
Otherwise use EBL, or nano-imprinting
s*********j
发帖数: 13
l******i
发帖数: 39
40
来自主题: Nursing版 - 临床护理简写
http://www.globalrph.com/abbrev.htm 这个Website很好。
这些是些常用的:
* Ac: before meals
* ad lib: at will, as desired
* adm: admission, admitted
* ASAP: as soon as possible
* Bid: twice a day
* Bm: bowel movement
* BP: blood pressure
* BRP: bathroom privileges
* C: Centigrade, Celsius
* Cap: capsule
* CC: chief complaint
* cc: cubic centimeter
* c/o: complains of
* C02: carbon dioxide
* CPR: cardiopulmonary resuscitation
* CXR: chest x-ray
... 阅读全帖
I****e
发帖数: 7742
41
scale 多大的
精度要求多高
精度要求不高用photolithography,精度要求高用ebeam lithography
弄完之后RIE就可以了
或者找个带GIS module 的 EBL machine, 一次也就搞定了
不过这个活儿一般价格都挺贵的
R***n
发帖数: 733
42
我副业搞EBL的,能做20 nm devices,要我不?
s***e
发帖数: 7166
43
EBL的精度更多地是看机器而不是看人吧……
z*****i
发帖数: 43
44
来自主题: Physics版 - 求semiconductor方面的工作推荐
PhD candidate,马上毕业(12月),现在还没找到工作,如果有也是这方面的前辈,请帮
助推荐一下吧,谢谢,以下是我的skills:
Skills and Techniques:
♦ Semiconductor device fabrication process: Developed new methods for
quantum dot device fabrication and characterization; Conducted and
Optimized the fabrication process.
♦ Fabrication and Characterization techniques: 5 years hands-on
experience with: Photolithography, Electron Beam Lithography (EBL), Reactive
Ion Etching (RIE), Thin film Deposition, Wire Bonding, Semiconductor Device
Pack... 阅读全帖
1 (共1页)